Term
|
Definition
| standard on station/work uniforms for emergency services |
|
|
Term
|
Definition
| standard on fire department occupational safety and health program |
|
|
Term
|
Definition
| standard on protective clothing and equipment for wildland firefighting |
|
|
Term
|
Definition
| standard on protective ensembles for technical rescue incidents |
|
|
Term
|
Definition
| standard on vapor protective ensembles for hazardous materials emergencies |
|
|
Term
|
Definition
| standard on liquid splash protective ensembles and clothing for hazardous materials emergencies. |
|
|
Term
|
Definition
| standard on protective ensembles for structural fire fighting and proximity fire fighting. |
|
|
Term
|
Definition
| standard on selection , care and maintenance of protective ensembles for structural and proximity firefighting |
|
|
Term
changes in equipment design may be based on recommendations by:
________
_________
________
__________ |
|
Definition
-equipment manufacturers
-labor groups
-industry /product specialists
-local/state or national regulating bodies |
|
|
Term
some of the triggering mechanisms for recommending changes have been:
-_______ attributed to PPE failure
-improvements in fabrics, materials, design
-independent studies |
|
Definition
| significant injuries or deaths |
|
|
Term
once recommended, all changes in design and materials must undergo:
- rigorous testing by regulatory agencies thru certified_______ laboratories.
-revisions to _________________________
-____________ by fire departments for risk assessment documentation. |
|
Definition
-third party testing
-performance and or consensus standards
-performance trials |
|
|
Term
Examples of recent changes:
-____ - addition of the ____________ as required equipment for all structural and proximity firefighting jackets
-_____ - revision in NFPA 1851 defining __________________ for structural and proximity firefighting ensembles. |
|
Definition
-2007 - drag rescue device
-2008 - maximum shelf /service life |
|
|
Term
| because of the varied mature of emergency response the need has arisen to create ____________ of PPE to meet the demands of our varied duties. this equipment is defined by its ____________and /or _____________ |
|
Definition
-specialized forms
-primary usage
-the hazard that the user is protected from |
|
|
Term
types of specialty PPE used by the SLCFD
-______
-___________
-_______
-_______
-__________ |
|
Definition
-station wear/medical response
-swiftwater rescue
-Haz Mat
-technical rescue
-wildland/brush Firefighting |
|
|
Term
body substance isolation equipment
-
-
-
- |
|
Definition
-non latex gloves
-safety glasses
-M95 mask
-disposable gown |
|
|
Term
station wear is ____________ other greater forms of PPE
- the materials used in the construction should be __________ |
|
Definition
-designed to complement
-inherently fire resistant |
|
|
Term
station footwear:
- is designed to provide the user with _____________
-is generally outfitted with zipper/speed laces to facilitate __________
-is available in a wide variety of styles, heights, etc
- may or may not offer blood borne pathogen barrier per ________ |
|
Definition
-toe and shank protection
-rapid removal
-NFPA 1999 |
|
|
Term
-technical rescue PPE is designed to allow freedom of movement and withstand the rigors of ___________
- the technical rescue ensembles differ based upon ___________ |
|
Definition
-greatly varying worksites and environments
-rescue discipline |
|
|
Term
PFDs designed for rescue usage must have a ____________, allowing he swimmer to free themselves from a tagline should they become __________
-PFDs are required equipment not only for technician level team members bu also for ___________
-SWR PPE offers ___________ from high heat environments and can increase the potential for user injury if the user is not properly trained |
|
Definition
-breakaway tether system
-entrapped or submerged
-all personnel operating within the hazard area
-no protection |
|
|
Term
-brush garments are constructed of a single outer shell
-outer shells must have an RPP of _____
-brush garments issued by the slcfd is designed to be ___________ the station uniform and serve as an additional layer of protection from ___________ |
|
Definition
-not less than 7.0
-worn over
-short term radiant heat exposures |
|
|
Term
a limited quantity of web gear and fire shelters are maintained at designated Aux stations
-
-
-
- |
|
Definition
|
|
Term
| wildland FF equipment is designed for ________ and ___________ |
|
Definition
-freedom of movement
-extended work periods |
|
|
Term
wildland footwear:
-is specifically designed for use on _________
-does __________ ( no steel toe)
-is a minimum of ____________
-is often equipped with speed laces for rapid donning |
|
Definition
-uneven and rocky terrain
-not provide toe protection
-10" in height |
|
|
Term
Haz Mat garments are sub categorized by threat potential
-__________ fully encapsulated vapor protective
-______encapsulating or non encapsulating splash protective
-______ non encapsulating splash/exposure protective
-______ structural FF PPE |
|
Definition
-level A
-level B
-level C
-level D |
|
|
Term
Thermal protective performance
- to estimate injury time:______
radiant protective performance
-to estimate injury time:______ |
|
Definition
-TPP/2=time to 2nd degree burn
-RPP*2=time to 2nd degree burn |
|
|
Term
total Heat Loss
- a numeric value assigned to an ensemble composite based upon a measure of breathability the higher the numeric value the greater the flow of heat/perspiration from inside the garment to outside the garment. this is a _____________ based upon the minimum standard of ______ |
|
Definition
-pass/fail evaluation
-205 W/M2 |
|
|
Term
conductive and compressive heat resistance
-a measure of performance given to a protective ensemble as measured in the knees and shoulder areas. this number translates to the approximate time it takes for heat to transfer through either a knee or shoulder assembly, when compressed causing a ______.
this test is a ________ based upon the minimum standard of _____
-CCHR for shoulder asemblies is tested with a _______________
-CCHR for knee assemblies is tested with a __________ |
|
Definition
-temperature rise of 43 degrees F
-pass/fail evaluation
-25 seconds
-compressive force of 2psi
-compressive force of 8psi |
|
|
Term
Structural FF PPE
-ensemble elements
-
-
-
-
-
-
structural FF gear is designed to work as an entire ensemble with each element having ______ as well as _______ |
|
Definition
-helmet
-protective hood
-gloves
-boots
-turnout coat
-turnout pants
-individual construction and design requirements
-ensemble integration requirements |
|
|
Term
helmets
- attached earflaps- _____
-attached eye protection
-
-
-
retro reflective trim
- |
|
Definition
-minimum TPP of 20.0
-face shield
-goggles
-combination
-4"minimum |
|
|
Term
protective hood
- minimum bib length
-
-
-
-TPP of ______ |
|
Definition
-9" on side
-13" to front
-12" to back
-no less than 20.0 |
|
|
Term
gloves
- must be of __________
-TPP of ______
-gloves wrist opening must _______ beyond wrist crease |
|
Definition
-3 layer composite design
-no less than 35.0
extend at least 2" |
|
|
Term
boots
- sole with raised heel and _______ insert
-________-steel or composite
-minimum height of _____
water resistant and thermally insulated |
|
Definition
-puncture resistant shank
-protective toe cap
-10" |
|
|
Term
Turnout jacket/pants
-3 layer design
-outer shell- protection from
-
-
moisture barrier- protection from
-
thermal liner - protection from
-
composite TPP of ________
composite THL of_________
shoulder/knee CCHR of no less than_____
jacket must have DRD
jacket coller must be at least_____
jacketr and pant must have a _______
jacket and pants must maintain a minimum of _______
jacket and pants must be affixed with _____
trim must be at least _____ |
|
Definition
-abrasion/physical damage
-flame impingment
-steam
-radiant/conducted heat
-no less than 35
-205 W/M2
-25 seconds
-3" in height
-complete positive closure system
-3" of overlap
-retroreflective trim
- 2 " in width |
|
|
Term
unclean PPE __________the same protection that clean PPE can.
Having dirty , damaged or missing PPE does not make you salty or hardworking, it makes you look __________ |
|
Definition
-does not offer
-selfish, arrogant, and complacent |
|
|
