23. The PC needs to automatically detect any DIMM you have installed. It does this through the use of a unique chip called ____________________ installed on every DIMM stick. 

24. A special type of RAM called ____________________ is used for error checking on DRAM. 

25. As SDRAM was not fast enough for the Pentium 4, ____________________ was developed.

26. Since RDRAM could be used only with Intel components, AMD developed ____________________.

27. A passive device called ____________________ ensures that all RIMM slots are populated. 

28. The ____________________ doubles the output of SDRAM by making two processes every clock cycle.

29. DDR SDRAM for laptops comes in ____________________ or 172-pin micro DIMMs. 
________________________________________

30. The errors that the MCC detects from the parity or ECC chips are known as ____________________. 

31. Solar flares, dust, and software problems are the source of ____________________ parity errors.

32. The ____________________ stick is used in RDRAM. 

34. The two types of parity errors are ____________________ and ____________________.

35. The ____________________ occurs when a Windows system locks up and shows a blue screen with an error message.

36. A system with a 200-MHz RAM clock speed would require a PC speed rating of ____________________.

37. The _________________________ provides the system with all details about the DIMM, including its size and speed.

38. Bad RAM and parity errors can trigger a _________________________. 

39. DDR SDRAM doubles the ____________________ of SDRAM by making two processes for every clock cycle.