Term
|
Definition
| A physical layer standard for networks that specifies baseband transmissions, twisted pair media, and 10Mbps throughput. 10BaseT networks have a maximum segment length of 100 meters and relay on a star topology. |
|
|
Term
|
Definition
| A physical layer standard for achieving 10Gbps data transmission over single mode, fiber-optic cable. In 10Gbase-ER, the ER stands for extended reach. This standard specifies a star topology and segment lengths up to 40000 meters. |
|
|
Term
|
Definition
| A variation of the 10Gbase-ER standard that is specifically encoded to operate over SONET links. |
|
|
Term
|
Definition
| A physical layer standard for achieving 10Gbps data transmision over single mode fiber optic cable using wavelengths of 1310 nanometers. In 10GBase-LR, the LR stands for long reach. This standard specifies a star topology and segments lengths of up to 10000 meters. |
|
|
Term
|
Definition
| A variation of the 10GBase-LR standard that is specifically encoded to operate over sonet links. |
|
|
Term
|
Definition
| A physical layer standard for achieving 10Gbps data transmission over a multimode fiber using wavelengths of 850 nanometers. the maximum segment length for 10Gbase-SR can reach up to 300 meters, depending on the fiber core diameter and modal bandwidth used. |
|
|
Term
|
Definition
| A variation of the 10-Gbase-SR standard that is specifically encode to operate over SONET links. |
|
|
Term
|
Definition
| A physical layer standard for achieving 10Gbps data transmission over twisted pair cable. Described in its 2006 standard 802.3an, IEEE specifies CAT 6 or CAT 7 cable as the appropriate medium for 10Gbase -T. The maximum segment length foe 10GBase-T is 100 meters. |
|
|
Term
|
Definition
| A physical layer standard for networks that specifies baseband transmission, multimode fiber cabling, and 100 Mbps throughput. 100Base-FX networks have a maximum segment length of 2000 meters. 100Base-FX is also known as Fast Ethernet. |
|
|
Term
|
Definition
| A physical layer standard for networks that specifies baseband transmission, twisted pair cabling, and 100Mbps throughput. 100Base-T networks have a maximum segment length of 100 meters and use the star topology. 100Base-T is also known as Fast Ethernet. |
|
|
Term
|
Definition
| A type of 100Base-T network that uses two wire pairs in a twisted pair cable, but uses faster signaling to achieve 100Mbps throughput. It is capable of full duplex transmission and requires CAT 5 or better twisted pair media. |
|
|
Term
|
Definition
| A physical layer standard for networks that specifies 1Gbps transmission over fiber-optic cable using baseband transmission. 1000Base-LX can run on either single mode or multimode fiber. The LX represents its reliance on long wavelengths 1300 nanometers. 1000Base-LX can extend to 5000 meter segment lengths using single mode , fiber optic cable, 1000Base-LX networks can use one repeater between segments. |
|
|
Term
|
Definition
| A physical layer standard for networks that specifies 1Gbps transmission over fiber optic cable using baseband transmission. A 1000-Base-SX runs on multimode fiber. Its maximum segment length is 550 meters. The SX represents its reliance on short wavelengths of 850 nanometers. 1000Base-SX can use one repeater. |
|
|
Term
|
Definition
| A physical layer standard for achieving 1Gbps over UTP, 1000Base-T achieves its higher throughput by using all four pairs of wires in a CAT 5 or better twisted pair cable to both transmit and receive signals. 1000Base-T also uses a different data encoding scheme than that used by other UTP physical layer specifications. |
|
|
Term
|
Definition
| A guideline for 10Mbps Ethernet networks stating that between two communicating nodes. the netwrok cannot contain more than five network segments connected by four repeating devices, and no more than three of the segments may be populated. |
|
|
Term
|
Definition
| The IEEE standard that describes 1000Base-T Ethernet technology that runs over four pairs of CAT 5 or better cable. |
|
|
Term
|
Definition
| The IEEE standard that describes 10gigabit Ethernet technologies, including 10Gbase-SR, 10GBase-SW, 10GBase-LW, 10GBase-ER, and 10GBase-EW |
|
|
Term
|
Definition
| The IEEE standard that specifies a way of supplying electrical power over Ethernet (PoE). 802.3af requires CAT 5 or better UTP or STP cabing and uses powerered devices. PoE is compatible with existing 10Bse-T, 100Base-TX, 1000Base-T, and 10GBase-T implementations. |
|
|
Term
|
Definition
| The IEEE standard that describes 10GBase-T a 10Gbps Ethernet technology that runs on CAT 6 or CAT 7 twisted pair cable. |
|
|
Term
|
Definition
| The IEEE standard that describes Fast Ethernet technologies including 100Base-TX |
|
|
Term
|
Definition
| The IEEE standard that describes 1000Base OR 1GIGABIT ethernet technologies including 1000Base-LX and 1000Base-SX |
|
|
Term
|
Definition
| A networks method of controlling how nodes access the communciations channel. For example, CSMA/CD (Carrier Sense Multiple Access with Collision Detection) is the access method specified in the IEEE 802.3 (Ethernet) standard. |
|
|
Term
|
Definition
| A topology in which each workstation participates in transmitting data over the network. A ring topology is considered an active topology. |
|
|
Term
|
Definition
| Logically grouped network nodes that can communicate directly via broadcast transmissions. By default switches and repeating devices such as hubs extend broadcast domains. Routers and other layer 3 devices separate broadcast domains. |
|
|
Term
|
Definition
| A topology in which a single cable connects all nodes on a network without intervening connectivity devices. |
|
|
Term
|
Definition
| A level of Ethernet service that is characterized by very high throughput and reliability and is used between carriers such as NSP's. |
|
|
Term
|
Definition
| A type of switching in which a connection is established between two network nodes before they begin transmitting data. Bandwidth is dedicated to this connection and remains available until users terminate the communication between the two nodes. |
|
|
Term
|
Definition
| A type of backbone that uses a router or switch as the single central connection point for multiple subnetworks. |
|
|
Term
|
Definition
| In Ethernet networks, the interface of one nodes data transmission with the data transmission of another node sharing the same segment. |
|
|
Term
|
Definition
| The portion of an Ethernet network in which collisions could occur if two nodes transmit data at the same time. Switches and routers separate collision domains. |
|
|
Term
CSMA/CD
Carrier Sense Multiple Access with Collision Detection |
|
Definition
| A network access mthod specified for use by IEEE 802.3 (Ethernet) networks. In CSMA/CD, each node waits its turn before transmitting data to avoid interferring with other nodes transmissions. If a node's NIC determines that its data have been involved in a collision, it immediately stops transmitting. Next in a process called jamming, the NIC issues a special 32-bit sequence that indicates to the rest of the network nodes that its previous transmission was faulty and that those data frames are invalid. After waiting , the NIC determines if the line is again available, if it available the NIC retransmits its data. |
|
|
Term
|
Definition
| A group of connectivity devices linked together in a serial fashion. |
|
|
Term
|
Definition
| The length of time data take to travel from one point on the segment to another point. On Ethernet networks, CSMA/CD's collision detection routine cannot operate accurately if the data propagation delay is too long. |
|
|
Term
|
Definition
| A type of backbone in which a number of intermediate connectivity devices are connected to one or more central connectivity devices, such as switches or routers, in a hierarchy. |
|
|
Term
|
Definition
| An entire organization, including lcoal and remote offices, a mixture of computer, and a number of departments. enterprise wide computing takes into account the breadth and diversity of a large organizations computer needs. |
|
|
Term
|
Definition
| The original Ethernet frame type developed by Digital equipment Corporation, Intel, and Xerox, before the IEEE began to standardize Ethernet. Ethernet II is distinguished from other Ethernet frame types in that it contains a 2 byte type field to identify the upper layer protocol contained in the frame. It supports TCP/IP and other higher-layer protocols. |
|
|
Term
|
Definition
| A type of Ethernet network that is capable of 100Mbps throughput. 100Base-T and 100Base-FX are both examples of Fast Ethernet. |
|
|
Term
|
Definition
| A type of Ethernet for a component or system to continue functioning despite damage or malfunction. |
|
|
Term
|
Definition
| A type of Ethernet network that is capable of 1000Mbps or 1 Gbps throughput. |
|
|
Term
|
Definition
| A physical topology that combines characteristics of more than one simple physical topology. |
|
|
Term
|
Definition
| A part of CSMA/CD in which upon detecting a collision a station issues a special 32 bit sequence to indicate to all nodes on an ethernet segment that its previuosly transmitted frame has suffered a collision and should be considered faulty. |
|
|
Term
|
Definition
| A characteristic of a network transmission that reflects the way in which data are transmitted between nodes. A network's logical topology may differ from its physical topology. The most common logical topologies are bus and ring. |
|
|
Term
| MPLS (Multiprotocol label switching) |
|
Definition
| A type of switching that enables any one of several layer 2 protocols to carry multiple types of layer 3 protocols. One of its benefits is the ability to use packet switched technologies over traditionally circuit switched networks. MPLS can also also create end-to-end paths that act like circuit switched connections. |
|
|
Term
|
Definition
| A measure of the highest frequency of signal a multimode fiber optic cable can support over a specific distance. |
|
|
Term
|
Definition
| A type of switching in which data are broken into packets before being transported. In packet switching, packets can travel any path on the network to their destination because each packet contains a destination address and sequencing information. |
|
|
Term
|
Definition
| The bytes added to the data (or information) portion of an Ethernet frame to ensure this field is at least 46 bytes in size. Padding has no effect on the data carried by the frame. |
|
|
Term
|
Definition
| A type of backbone that consists of more than one connection from the central router or switch to each network segment. |
|
|
Term
|
Definition
| A network topology in which each node passively listens for, then accepts, data directed to it. A bus topology is considered a passive topology. |
|
|
Term
|
Definition
| On a network using Power over Ethernet, a node that receives power from power sourcing equipment. |
|
|
Term
|
Definition
| The physical layout of the media, nodes, and devices on a network. A physical topology does not specify device types, connectivity methods, or addressing schemes. Physical topologies are catorgized into three fundamental shapes, bus, ring, and star. these shapes can be mixed to create hybrid topologies. |
|
|
Term
| PoE (Power over Ethernet) |
|
Definition
| A method of delivering current to devices using Ethernet connection cables. |
|
|
Term
|
Definition
| The filed in an Ethernet frame that signals to the receiving node that data are incoming and indicates when the data flow is about to begin. |
|
|
Term
| PSE (Power Sourcing Equipment) |
|
Definition
| On a network using Power over Ethernet, the device that supplies power to end nodes. |
|
|
Term
|
Definition
| The result of specifications for guaranteeing data delivery within a certain period of time after their transmission. |
|
|
Term
|
Definition
| Anetwork layout in which each node is conencted to the two nearest nodes so that the entire network forms a circle. Data are transmitted in one direction around the ring. Each workstation accepts and responds to packets addressed to it, then forwards the other packets to the next workstation in the ring. |
|
|
Term
|
Definition
| A type of backbone that consists of two or more internetworking devices connected to each other by a single cable in a daisy chain. |
|
|
Term
| SFD (Start-of-Frame-Delimiter) |
|
Definition
| A 1 byte field that indicates where the data field begins in an Ethernet frame. |
|
|
Term
|
Definition
| A phenomenon, caused by improper termination on a bus topology network, in which signals travel endlessly between the twp ends of the network, preventing new signals from getting through. |
|
|
Term
|
Definition
| A physical layer in which every node on the network is connected through a central connectivity device. Any single physical wire on a star network only two devices, so a cabling problem will affect only two nodes. Nodes transmit data tot he device , which then retransmits the data to the rest of the network segment where the destination node can pick it up. |
|
|
Term
|
Definition
| A hybrid topology in which groups of workstations are connected in a star fashion to connectivity devices that are networked via a single bus. |
|
|
Term
|
Definition
| A hybrid topology that uses the physical layout of a star and the token passing data transmission method. |
|
|
Term
|
Definition
| A component of a network's logical topology that manages how packets are filtered and forwarded between nodes on the network. |
|
|
Term
|
Definition
| A resistor that is attached to each end of a bus topology network and that causes the signal to stop rather than reflect back toward its source. |
|
|
Term
| Components of Serial Backbone |
|
Definition
Single Medium daisy chain fashion
Gateways
Routers
Switches |
|
|
Term
|
Definition
Hierarchy of central connectivity devices
Daisy-chain linked repeating devices |
|
|
Term
|
Definition
| Single router or switch with multiprocessors |
|
|
Term
|
Definition
Most Robust
More than one central router, switch |
|
|
