Term
| What are the 5 sections (I,II,III,IV,V) of the (R.E.I.)? |
|
Definition
I. General
II. 600V, Nominal or Less
III. Over 600V, Nominal
IV. Tunnel installations over 600V Nominal.
V. Manholes and other electrical enclosures intended for personnel entry, all V's. |
|
|
Term
| In the R.E.I. section (I) is "General". Define General. |
|
Definition
| General requirements for the examination and approval, installation and use, access to and spaces about electrical conductors and equipment; enclosures intended for personnel entry; and tunnel installations. |
|
|
Term
| 110.2 - Approval, what does this mean? |
|
Definition
| The conductors and equipment required or permitted shall be acceptable only if approved. Approval occurs when the conductors and equipment are acceptable to the Authority Having Jurisdiction. |
|
|
Term
| 110.6 - Conductor Sizes. Conductor (wire) Sizing is expressed in? |
|
Definition
| (AWG) American Wire Gauge. |
|
|
Term
| 110.7 - Wiring Integrity. What is meant by "Wiring Integrity"? |
|
Definition
| Completed wiring installations "shall be" (= mandatory rules) free from short circuits, ground faults, or any connections to ground other than as required or permitted elsewhere in the Code. |
|
|
Term
| 110.14 - Electrical Connections. |
|
Definition
| Stripping wire, connecting, etc; done properly. |
|
|
Term
| What does article 110.16 cover? |
|
Definition
|
|
Term
| In 110.21 - Marking, what to main types of information "shall be" on all electrical equipment? |
|
Definition
| Manufacturer's identifying information and also electrical rating data. |
|
|
Term
| Article 110.24 - Available Fault Current. What are the 2 mandatory rules? |
|
Definition
A. Field Marking
B. Modifications |
|
|
Term
| 110.24 - Available Fault Current. What is "Field Marking" |
|
Definition
| other than dwelling units shall be legibly marked and dated. |
|
|
Term
| 110.24 - Available Fault Current. What is "Modifications"? |
|
Definition
| Equipment must have an interrupting rating or short-circuit current rating equal to or greater than fault current if it is to be used safely. |
|
|
Term
| Article 110.26 - Spaces About Electrical Equipment; General Rule is? |
|
Definition
| Accessibility = 3' in front of panel doors. |
|
|
Term
| Article 110.26 - Spaces About Electrical Equipment; Headroom? |
|
Definition
|
|
Term
| Article 110.26 - Spaces About Electrical Equipment; Enclosure door openings? |
|
Definition
|
|
Term
| Article 110.27 - Guarding of Live Parts. What are A, B, and C? |
|
Definition
A. Accidental Contact
B. Prevent Physical Contact
C. Warning Signs |
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
| National Electrical Manufacturer's Association |
|
|
Term
|
Definition
|
|
Term
|
Definition
| Tunnel Installations over 600V, Nominal |
|
|
Term
|
Definition
| Manholes and Other Electrical Enclosures Intended for Personnel Entry, All Voltages |
|
|
