Term
| What command specifies an interface as an inside global (WAN side) interface? |
|
Definition
|
|
Term
| What command displays PPPoE protocol messages about events that are part of normal session establishment or shutdown? |
|
Definition
|
|
Term
| What command displays authentication protocol messages such as CHAP and PAP messages? |
|
Definition
|
|
Term
| What command displays information about currently active PPPoE sessions? |
|
Definition
|
|
Term
| What command displays address bindings on the Cisco IOS DHCP server? |
|
Definition
|
|
Term
| What command displays active NAT translation? |
|
Definition
|
|
Term
| What command enables multiple PVCs on the interface? |
|
Definition
|
|
Term
| What command assigns the virtual circuit and virtual path to an subinterface? |
|
Definition
|
|
Term
| What command displays events on a VC/VP? |
|
Definition
| debug pppatm event vc vc/vp |
|
|
Term
| What command displays errors on a VC/VP? |
|
Definition
| debug pppatm error vc vc/vp |
|
|
Term
| What command enables fast switching on an interface? |
|
Definition
|
|
Term
| What command sets the dynamic addressing as DHCP on an interface? |
|
Definition
|
|
Term
| What command is used to set an IP range to be excluded from a DHCP pool? |
|
Definition
| ip dhcp excluded-address starting-address ending-address |
|
|
Term
| What does the MTU need to be on an interface for PPP to work efficiently? |
|
Definition
| The MTU should be configured at 1492, because PPP will automatically add an extra 8-byte header, exceeding the maximum 1500 with the default setting. |
|
|
Term
| What command configures a dialer interface so that it negotiates it PPP login credentials? |
|
Definition
|
|
