Term
| Maximum hole for mortise locks or labeled viewers in a fire door? |
|
Definition
|
|
Term
| Surface Applied Hardware... |
|
Definition
| Shall be applied to the door or frame without removing material other than drilling round holes to accommodate cylindeers, spindles, similar operational elements and trhough bolts in doors
1" Max |
|
|
Term
| Total Area of all attached signs shall not exceed |
|
Definition
| 5% or the area of the face of the fire door |
|
|
Term
| Signs shall be attached to a door by use of |
|
Definition
|
|
Term
| Signs shall not be installed on ___________ in fire doors |
|
Definition
|
|
Term
|
Definition
| Interfere with the operation of the door. |
|
|
Term
| Access-type door assemblies shall consist of __________ |
|
Definition
| single swinging steel doors with frames, self latching device, and closing mechanisms |
|
|
Term
| Service Counter doors shall be ___________ |
|
Definition
| Of the single or two speed counterbalanced type of flush design or the rolling steel type of formed steel and shall include wall guides, frame, sill, latching and counterbalancing mechanism |
|
|
Term
| Fire exit hardware shall consist of ________ |
|
Definition
| exit devices that have been labeled for both fire and panic protection. |
|
|
Term
| Fire door hardware that is applied to swinging doors shall consist of ___________ _____________ ___________ |
|
Definition
| surface mounted strap hinges, surface applied latches and closing devices. |
|
|
Term
| All hardware for sliding doors shall be |
|
Definition
|
|
Term
| Sills for swinging doors with fire door hardware shall extend ___________ for flush mounted doors |
|
Definition
| at least the depth of the door frame |
|
|
Term
| Sills for swinging doors with fire door hardware shall extend ___________ for lap mounted doors |
|
Definition
| beyond the opening for a length equal to the projection of the install door or doors. |
|
|
Term
| Sills for swinging doors with fire door hardware shall be constructed of __________ and shall extend ___________ for rolling steel doors |
|
Definition
a)noncombustible material
b)past each jamp as necessary to be completely under the guides and shall extend out from the centerline of the guide groove a minimum of 4" |
|
|
Term
| Flush concrete sills shall extend _____________ |
|
Definition
| to the wall opening on both sides |
|
|
Term
| Sills for service counter fire doors shall be ______________ |
|
Definition
| provided as part of the fire door assembly |
|
|
Term
| Lintels shall be ___________ |
|
Definition
| brick, concrete or masonry arches, steel or reinforced concrete |
|
|
Term
| The clearance under the bottom of the door shall be a maximum of ____________ |
|
Definition
|
|
Term
| When the bottom of the door is more than 38" above the finished floor the maximum clearance shall not exceed __________ |
|
Definition
|
|
Term
| Combustible floor coverings shall not extend through openings protected by ___________ |
|
Definition
|
|
Term
| Fire door closing mechanisms shall not have ___________ |
|
Definition
|
|
Term
| The clearances between top and vertical edges of the door and the frame and the meeting edges of doors swinging in pairs shall be __________ for steel doors and _________ for wood doors |
|
Definition
|
|
Term
| Transom or side lights shall be _________ |
|
Definition
|
|
Term
| Frames with transom, side lights or both shall be permitted where a _________ fire protection rating or less is required |
|
Definition
|
|
Term
| Frames with transom lights, side lights or both installed with fire resistance rate glazing testing in accordance with ___________ shall be permitted where a fire protection rating exceeding ________ is required |
|
Definition
|
|
Term
Minimum Hinge Size
Door: 4'X10'X1 3/4" hinge type Steel, mortise or surface |
|
Definition
| Height 4.5" Thickness .180" |
|
|
Term
Minimum Hinge Size
4'X8'X1 3/4" Hinge type: Steel, mortise or sufrace |
|
Definition
| height 4.5" Thickness .134" |
|
|
Term
Minimum Hinge Size
3 1/6'X8'X1 3/4" Hinge type Steel, olive knuckle or parumelle |
|
Definition
| Height 6" Thicknets .225" |
|
|
Term
Minimum Hinge Size
4'X10'X1 3/4" door hinge type Steel Pivots (including top, bottom and intermediate) |
|
Definition
| Height 4"X Thickness.225" |
|
|
Term
Minimum Hinge Size
3'X5'X1 3/4" hinge type Steel, mortise or surface |
|
Definition
| Height 4" Thickness .130" |
|
|
Term
Minimum Hinge Size
Door Size 2'X3'X1 3/4" hinge type Steel, mortise or surface |
|
Definition
| Height 3" thickness .092" |
|
|
Term
Minimum Hinge Size
Door size 3'X7'X1 3/4" hinge type Steel, mortise or surface (labeled self-closing, spring type) |
|
Definition
height 4" thickness .134" or
4.5" X .105" |
|
|
Term
Minimum Hinge Size
Door Size 3'X7'X1 3/8" hinge type steel, mortise or surface |
|
Definition
| height 3.5" thickness .123" |
|
|
Term
Minimum Hinge Size
2 2/3' X 7' X 1 3/8" hinge type steel, mortise or surface (labeled, self-closing, spring type) |
|
Definition
| height 3.5" thickness .105" |
|
|
Term
Minimum Hinge Size
Heavy doors or doors subjected to heavy use or unusual stress |
|
Definition
| height 4" thickness .180" |
|
|
Term
Securing hinges to doors
Mortise hinges secured to reinforcement in the doors with? |
|
Definition
|
|
Term
| Mortise hinges shall be secured to wood and plastic covered compsite doors or wood core doors with? |
|
Definition
| No. 12X1 1/4" flat, threaded to the head steel wood screws. Pilot holes shall be drilled that are 5/32" in diameter |
|
|
Term
| Surface hinges shall be installed with? |
|
Definition
|
|
Term
|
Definition
|
|
Term
| Maximum # of inches between hinges on a fire door |
|
Definition
| Must have a hinge every 30" or fraction there of. |
|
|
Term
| Dutch Door latch options? |
|
Definition
A) Top door latches into top of bottom door. Flat astragal. Bottom door latches into frame.
B) Top and Bottom doors both latch into frame. Shelf is optional. |
|
|
Term
|
Definition
| Openings in fire wall and in walls that divide a single building into fire areas |
|
|
Term
|
Definition
| Openings in enclosures of vertical communications through building and in 2-hour rated partitions providing horizontal fire separations |
|
|
Term
|
Definition
| Openings in walls or partitions between rooms and corridors having a fire resistance rating of 1 hour or less. |
|
|
Term
|
Definition
| Opening in exterior walls subject to severe fire exposure from outside the building. |
|
|
Term
|
Definition
| Openings in exterior walls subject to moderate or light fire exposure from outside the building. |
|
|
Term
Swinging Wood Composite fire doors equipped with builders hardware.
A) Maximum bottom hinge distance from ground?
B) Maximum top hinge distance from top of door?
C) Strike distance from floor? |
|
Definition
A) 10 3/8"
B) 9 3/4"
C) 40 5/16" |
|
|
Term
Custom Steel Hollow Metal and composite fire doors equipped with buidlers hardware.
A) Maximum bottom hinge distance from ground?
B) Maximum top hinge distance from top of door?
C) Strike distance from floor? |
|
Definition
|
|
Term
Standard Steel Hollow Metal and Composite fire doors equipped with builders hardware.
A) Maximum bottom hinge distance from ground?
B) Maximum top hinge distance from top of door?
C) Strike distance from floor? |
|
Definition
A) 13"
B) 11 3/4"
C) 40 5/16" |
|
|
Term
| On fire doors over ___ ft ____ in. ________________ intermediate hinges are required |
|
Definition
a) 7 ft
b) 6 in
c) 2 equally space |
|
|
