Term
router eigrp
autonomous-system |
|
Definition
Global command to move the user into EIGRP configuration
mode for the listed ASN |
|
|
Term
network networknumber
[wildcard-mask] |
|
Definition
EIGRP router subcommand that matches either all interfaces in
a classful network or a subset of interfaces based on the ACLstyle
wildcard mask, enabling EIGRP on those interfaces |
|
|
Term
| maximum-paths numberpaths |
|
Definition
Router subcommand that defines the maximum number of
equal-cost routes that can be added to the routing table |
|
|
Term
|
Definition
Router subcommand that defines an EIGRP multiplier used to
determine whether an FS route’s metric is close enough to the
successor’s metric to be considered equal |
|
|
Term
|
Definition
Interface subcommand that directly sets the interface
bandwidth (Kbps) |
|
|
Term
|
Definition
Interface subcommand that sets the interface delay value with a
unit of tens of microseconds |
|
|
Term
ip hello-interval eigrp
as-number timer-value |
|
Definition
Interface subcommand that sets the EIGRP Hello Interval for
that EIGRP process |
|
|
Term
ip hold-time eigrp
as-number timer-value |
|
Definition
Interface subcommand that sets the EIGRP hold time for the
interface |
|
|
Term
|
Definition
Router subcommand that disables (with the no option) or
enables the automatic summarization of routes at the boundary
of a classful network |
|
|
Term
passive-interface type
number |
|
Definition
Router subcommand that makes the interface passive to
EIGRP, meaning that the EIGRP process will not form neighbor
relationships with neighbors reachable on that interface |
|
|
Term
| passive-interface default |
|
Definition
Router subcommand that changes the EIGRP default for
interfaces to be passive instead of active (not passive) |
|
|
Term
no passive-interface type
number |
|
Definition
Router subcommand that tells EIGRP to be active (not passive)
on that interface or subinterface |
|
|
Term
|
Definition
Lists one line per interface on which EIGRP has been enabled,
but for which it is not made passive with the passive-interface
configuration command |
|
|
Term
show ip eigrp interfaces
type number |
|
Definition
Lists statistics interfaces on which EIGRP has been enabled, but
for which it is not made passive with the passive-interface
configuration command |
|
|
Term
show ip eigrp interfaces
detail [type number] |
|
Definition
Lists detailed configuration and statistics, for all interfaces or
for the listed interface, again for enabled interfaces that are not
passive |
|
|
Term
|
Definition
| Shows routing protocol parameters and current timer values |
|
|
Term
|
Definition
| Lists EIGRP neighbors and status |
|
|
Term
show ip eigrp neighbors
type number |
|
Definition
| Lists EIGRP neighbors reachable off the listed interface |
|
|
Term
|
Definition
Lists the contents of the EIGRP topology table, including
successors and FSs |
|
|
Term
show ip eigrp topology
subnet/prefix |
|
Definition
| Lists detailed topology information about the listed subnet |
|
|
Term
show ip eigrp topology |
section subnet |
|
Definition
Lists a subset of the show ip eigrp topology command (just
the section for the listed subnet ID) |
|
|
Term
|
Definition
|
|
Term
|
Definition
| Lists routes in the IPv4 routing table learned by EIGRP |
|
|
Term
show ip route ip-address
mask |
|
Definition
Shows a detailed description of the route for the listed subnet/
mask |
|
|
Term
show ip route | section
subnet |
|
Definition
Lists a subset of the show ip route command: just the section
for the listed subnet ID |
|
|
Term
|
Definition
| Displays changes to the EIGRP successor and FS routes |
|
|
