Term
| What differentiates the Matrix from other Consoles? |
|
Definition
It has no preamps
It has no Eq’s |
|
|
Term
| Most Audio connections are made via |
|
Definition
|
|
Term
| The Console has 2 Main Modes, Analog and Digital(DAW). There is a button that changes this status called what? |
|
Definition
|
|
Term
| When the Focus Button is lit, the side of the Console being used is the? |
|
Definition
|
|
Term
| How many total Analog I/O's are there on a the Matrix? |
|
Definition
|
|
Term
| The section on the Console that allows a user to change most of the analog-based configurations is called the |
|
Definition
|
|
Term
| To Change configurations on an Analog I/O you must first press its corresponding Select button |
|
Definition
|
|
Term
| Pressing which button will cause every channel to be affected by configuration changes |
|
Definition
|
|
Term
| The Channel Input Level is a Preamp? |
|
Definition
|
|
Term
| Name the 2 sources a Channel can receive from? |
|
Definition
|
|
Term
| The use of external Preamps will be necessary? |
|
Definition
|
|
Term
| The Channel Output (CH OP) is normally used for what? |
|
Definition
DAW Mixing Levels
or
Recording Sends to DAW |
|
|
Term
| How many FX sends are there on the Matrix? |
|
Definition
|
|
Term
| How many may be used at one time on a single channel |
|
Definition
|
|
Term
| How many Aux Returns are there? |
|
Definition
|
|
Term
| The Scribble Strip on the Matric can display user-defined names for Analog Channels |
|
Definition
|
|
Term
| The Matrix has 2 busses, REC and MIX. May they both be active at the same time |
|
Definition
|
|
Term
| The Master Fader works only with the? |
|
Definition
|
|
Term
| For Mixing, the Monitor Buss will recieve its signal from? |
|
Definition
|
|
Term
| There are 4 V-Pot Modes, which one will allow you to swap the currently assigned function on a V-pot to the Fader below it? |
|
Definition
|
|
Term
| Which button will cause the Fader from the OPPOSITE Focus to be assigned to the V-Pot? |
|
Definition
|
|
Term
| The SSL access more DAW functions? |
|
Definition
|
|
Term
| In the Transport Section, the 4 Arrow buttons surronding the Mode button are for what? |
|
Definition
| Navigates Channel Functions such as Plug Ins |
|
|
Term
| The page within the Matrix Remote Software where patching to Analog Outboard gear takes place is the |
|
Definition
|
|
Term
| When mixing , you must at least for now, route all DAW tracks to 'Stereo Out'. Where will this show up on the Console |
|
Definition
|
|
Term
| When Mixing, the CH IP must be set to? |
|
Definition
|
|
Term
| To insert a Plug-In, simply press 'Plug In' in the Soft Keys. You now see P3 in a mall Scribble strip to the left of the counter. What does this mean? |
|
Definition
| Indicates which Plug In slot you are using on a Channel |
|
|
Term
| To change PlugIn slots you will need to use what |
|
Definition
| The up/down Arrows around the Mode button |
|
|
Term
| When a Plug In is inserted its parameters will show up in the scribble strip |
|
Definition
| Yes but I still might have to scroll to access more parameters |
|
|
Term
| Logic was installed with Duende Cards. They model SSL EQ;s and Dynamicks. When scrolling to select a Plug In, the Duende cards is called |
|
Definition
|
|
Term
| Where in the Matrix Remote Software will you name your Sessions? |
|
Definition
|
|
Term
| Before a Snapshot maybe taken do you need to ENABLE the system? |
|
Definition
|
|
Term
| Taking a Snapshot is done by pressing |
|
Definition
|
|
