This is a room or dedicated location on the customer's premises that acts as a _______ for the various telecommunications servers in Business Class. This sometime called the "Closet".

a. telecommunications room

b. hub

c. Closet room

d. green room

b. hub

Which statement is True?

A. A Key system is sometimes referred to as a phone switch.
B. PBX's are usually found in small companies where fewer features are required.
C. You Usually dial "9" for an outside line with a PBX phone.
D. None of the above.

What does ILEC stand for?

A. Internal Local Exchange Carrier
B. International Local Exchange Carrier
C. Incumbent Logical Exchange Carrier
D. Incumbent Local Exchange Carrier

Backup Battery time for 8 Line EMTA?

A.4hrs.

B.6hrs.

C.8hrs.

D.12hrs.

Data throughput of a T1 connection

a. 2Mbps

b. 1.54Mbps

c. 12Mbps

d. 714kbps

How many call events can a BCDV 8 line emta handle?

A.14

B.18

C.8

D.16

On the Arris 8 line eMTA An Alarm Telemetry block pinout #2 means?

A.A/C Fail

B.Battery is low

C.Replace Battery

D. Battery is missing

On the Arris 8 line eMTA An Alarm on Telemetry block pinout #1 means?

A.A/C Fail

B.Battery is low

C.Replace Battery

D. Battery is missing

On the Arris 8 line eMTA An Alarm Telemetry block pinout #3 means?

A.A/C Fail

B.Battery is low

C.Replace Battery

D. Battery is missing

D. Battery is missing

On the Arris 8 line eMTA An Alarm Telemetry block pinout #4 means?

A.A/C Fail

B.Battery is low

C.Replace Battery

D. Battery is missing

On the Arris 8 line eMTA Telemetry what are the wire colors from left to right?

a. green-orange-blue-brown-white

b. white-blue-brown-green-orange

c. white-brown-blue-orange-green

d. white-brown-blue-green-orange

c. white-brown-blue-orange-green

(WBBOG)

What is the output of the LPSU for the 8-line Arris?

a. 48VAC 40 watts

b. 48VDC 50 watts

c. 24VAC 40 watts

d. 24VDC 50 watts

b. 48VDC 50 watts

What the typical charge time for the LPSU for the 8-line Arris eMTA.

a. 8 hours

b. 24 hours

c. 1 hour

d. 72 hours

What the backup time with the TM508 (LPSU) in idle?

a. 24 hours

b. 72 hours

c. 2 hours

d. 18 hours

d. 18 hours

What the backup time with the (LPSU) in use?

a.  8 hours

b. 24 hours

c. 18 hours

d. 4 hours

a.  8 hours

NAT:

A.Network Addressability Tunnel
B.Network Address Transition
C.Network Address Translation
D.Network Addressibility Transition

In a customer data network equipment what would come after router/or switch.

a. modem

b. TAP

c. NAS

d. patch bay

d. patch bay

Other potential Electrical Room equipment that mybe a customer that would connect after the switch or a Patch Bay.

a. DSL Modem

b. router

c. NAS (Network Patch Bay)

d. both a and c

d. both a and c

This is the Focal point of the customer equipment.

a. router

b. wireless router

c. NAS

d. Switch

A managed hard drive connected to a LAN that can be accessible by anyone on the internet as defined by a company's administrator.

a. server

b. AP

c. WAN

d. NAS

d. NAS (Network attached Storage)

DCT is what?

a. Digital Consumer Terminal

b. Digital Control Terminal

c. Device Center Terminal

d. both a and c.

a. Digital Consumer Terminal

True / False

AC power can be connected to eMTA (8 line) when using 48VDC power.

 False

Never connect AC power to eMTA when using 48VDC power.

If a customer is using a Key System/PBX it can.

a. allows a group of phone stations to access a common set of telephone lines

b. This is device that enables operators to deliver 8 line.

c.  It's a standard interface for connecting multiple line of telephones

d. Use for the data applications and phone distribution in a residential or light commercial.

a. allows a group of phone stations to access a common set of telephone lines

POS stands for what

a. Point of securely

b. Plan of Securely

c. Point of Sale system

d. Planing of Sales

c. Point of Sale system

ture / false

CLEC is Competitive Local Exchange Carrier

ture

is a (Comcast Block)

MPG is?

a.Mile per gallon

b. Megaport Gateway

c. Meet the People Goal

d. Meet the People Guaranteed

b. Megaport Gateway

(converts ethernet to a coaxial signal)

LPSU Backup time with TM508 idle

a. 4 hours

b. 24 hours

c. 18 hours

d. 20 hours

The technician should support all connectivity up through what on customer Demarcation Point.

a. LAN

b. WAN

c. ILEC

d. both a and c

b. WAN

(that the cable input on the cust. Demarcation Point)

The 110 Block is?

a. it can be used for both data applications and phone distribution.

b. can be used in residential and light commercial installations.

c. silver satin or any other stranded wire on punch-down can be use on the 110 block

d. both a and b

d. both a and b

a. it can be used for both data applications and phone distribution.

b. can be used in residential and light commercial installations.

66 Block - Telco standard connection block

a. line in from the left and out to the right

b. Lead with "TIP"  the top

c. only one wire per terminal and leave 1 to 3 feet of excess wire around.

d. all of the above

true/false

66 Block can be used for both data applications and phone distribution in residential and light commercial installing.

false

that would be 110 Block

Mushroom spool used to?

a. used for wire management on telecommunications

b. keep silver satin or any other stranded wire in order

c. help keep 1 foot or less of working  wire around punch-down block

d. both a and c

a. used for wire management on telecommunications

and helps keep 1 to 3 foot of excess working wire around punch-down blocks

ture/false

eMTA is not a avanced Internet Protocol (IP) services.

false

The eMTA is device that enables operators to deliver up  to 8 lines of telephony, tiered data and other advanced Internet Protocol (IP) services.

What does Comcast call it's Business phone service?

a. Comcast Digital Phone

b. Business Class Digital Voice

c. Comcast Digital Voice

d. Business Digital Phone

Point of Sale System is the AMT for one of our Business customer. They are having problems with it. What are somethings we can trouble shoots.

a. verify proper polarity, inbound and outbound at POS

b. Ask customer to adjust baud rate to 9600

c. tell customer it not our problem

d. both a and b

d. both a and b

a. verify proper polarity, inbound and outbound at POS

b. Ask customer to adjust baud rate to 9600

On a 66 Block you should route cables

a. to the left side of the block

b. to the right side of the block

c. any side is ok

d. behind the block

d. behind the block

On a 66 block what side is the customer side.

a. both sides

b. right side

c. left side

d. both right and left

b. right side

true/false

On the 66 Block the FCC requirement that customer agrees to any work that may be performed on the customer's side of the demarcation point.

The ILEC is the feed for?

a. Qwest, Verizon, AT&T, or the original provider

b. Comcast

c. Customer

d. both a and b

a. Qwest, Verizon, AT&T, ect

Comcast is called "CLEC Block"

What separate company side from customer side of a 66 block.

a. ILEC

b. CLEC

c. Bridger Clips

d. punch down Clips

c. Bridger Clips

This deletes unused channel and inserts local feed in Video equipment.

a. Channel deletion filter

b. channel deletion filter, modulator, and combiner

c. video modulator

d. both a and b

d. both a and b

channel deletion filter, modulator, and combiner can also be used for a subscription channel or other video feed such as cameras or a promotional video loop.

Modifies the signal for various reasons such as resolution compatibility, encryption, and other reasons.

a. DCT

b. Multi-media switcher

c. Video or Signal processor

d. Video Modulator

Switches high resolution video and audio for commercial application such as churches, sound reinforcement, meeting rooms, ect.

a. Multi-media Switcher

b. Video or Signal processor

c. router/switch

d. both b and c

What is between Video Modulator and the customer TV.

a. Directional coupler

b. Channel Deletion filter

c. Tap

d. both a and c

What come between the Vdeo Modulator and the customer baseband sources.

a. Diectional Coupler and TAP

d. Channel deletion Filter

c. Baseband cable

d. RCA cable

Max power consumption for an 8-line Arris EMTA

a. 60 watts

b. 50 watts

c. 20 watts

d. both a and b

The eMTA (8 line) is powed by the .

a. 110VAC

b. LPSU

c. UPS

d. none of the above

Another name for a switch

a. router

b. the Focal point

c. modem

d. any one of the above

What is a RJ45 used for?

A. Telephony

B. Internet

C. Cable

D. Fax Machines

What is the maximum REN per phone

a. 10
b. 5
c. 12
d. 24

Name three different types of ILEC connections

a. 110, 67 block and T1

b. 66, 111, block NID(screw in terminal block)

c. RJ-31x, RJ-21x, and Back of eMTA

d. 66, 110 Block and NID(screw ub terminal block)

UPS stands for what?

DSL stands for what

a. Digital Subscriber Line

b. Digital Signal Leak

c. Direct Subscrider link

d. Digital Signal Link

a. Digital Subscriber Line

eMTA is know as

a. Explorer Media Terminal Adapter

b. Embedded Multimedia Terminal Adapter

c. Embedded Media Terminal Adapter

d. Embedded Multimedia Telephone Adapter

ILEC stands for what

a. Incumbent Line Elec. Carrier

b.Incumbent Line Exchange Current

c. Incumbent Local Exchange Class

d. Incumbent Local Exchange Carrier

d. Incumbent Local Exchange Carrier

Line Card Supervisory Voltage for the eMTA is

a. 44VDC

b. 44VAC

c. 48VDC

d. 48VAC

c. 48VDC

RJ11 has how many pins, how many does it use?

a. has 6, use 2

b. has 4, use 2

c. has 2 use 2

d. has 6 use 4

a. has 6, use 2

RJ14 has how many pins how many does it use?

a. has 6, use 2

b. has 4, use 2

c. has 6, use 4

d. has 4, use 4

RJ25 has ____ pins, and how many does it use?

a. has 8, uses 6

b. has 6, uses 6

c. has 4, uses 2

d. has 8 uses 8

b. has 6, uses 6

can be 3 lines of telephone

RJ-21x has how many pins on each end?

a. 25

b. 30

c. 100

d. 50

d. 50

RJ-21x has how many pair per end?

a. 50 pair

b. 100 pair

c. 25 pair

d. 40 pair

RJ-45 is a Ethernet wires for network connectivity. If connecting two different data device. PC to router.

What is used?

a. 568A to 568B

b. 568A to 567A

c. 568A to 568A

d. 658A to 658B

RJ-45 Crossover is to connect?

a. two different data devices (PC to router)

b. eMTA ethernet port to PC

c. two of the same data devices (PC to PC)

d. none of the above

RJ-45 is a Ethernet wires for network connectivity. If connecting two of same data device. PC to PC.

What is used?

a. 568A to 568B

b. 568A to 567A

c. 568A to 568A

d. 658A to 658B

RJ-31x is used for what?

a. hooking up PC to PC

b. hooking up PC to router

c.  monitored security Alarm

d. hooking up eMTA to phone jack

In feeding the RJ-31x for the alarm system what pair feeds (or dail tone) goes the RJ-31x first and terminal do they go to.

a. secondard pair and 1 and 8

b. primary pair and 3 and 5

c. primary pair and 4 and 5

d. secondard pair and 1 and 8

On the RJ-31x for the alarm system what pair back feeds (dail tone)  to inside wiring, and terminal do they go to.

a. secondard pair and 1 and 8

b. primary pair and 3 and 5

c. primary pair and 4 and 5

d. secondard pair and 1 and 8

If you have a two pair telec. line what is the color of the secondary pair.

a. red and green

b. blue and blue/white

c. orange and orange/white

d. black and yellow

d. black and yellow

When wiring up a security system, what would be used to take dial tone form the eMTA  outlet to the NID?

a. primary white blue

d. secondary white blue

c. primary white orange

d. secondary white orange

On a RJ-31x dial tone leaves to go to the NID on what two pins?

a. 4 and 5

b. 1 and 8

c. 2 and 1

d. it doesn't matter