From the Remote Access Management Console, you run the Getting Started wizard and you receive a warning message:

Warning: The current user does not have the required permissions to configure WMI filtering in the domain. Verify Permissions

Add the user to the Domain Admins Group

You create a group managed service accoutn named gService1.

You need to configure a service named Service1 to run as the gService1 account.

How do you configure Service1?

run sc.exe and specify the qc parameter

Also known as Services Console, Configure log on settings.

You need to configure Server1 to provide unque NAP enforcement settings to the NAP non-compliant DHCP clients from Scope1.

What should you create?

A network policy that has the MS-Service Class Condition

The MS-Service Class condition restricts the policy to clients that have received an IP address from a DHCP scope that matches the specified DHCP profile name. This condition is used only when you are deploying NAP with the DHCP enforcement method.

A network contains two subnets subnet1 and subnet2. Server1 has the DHCP scope for each subnet.

You need to ensure that noncompliant computer on each subnet receive different policies.

Which two settings should you configure?

The MS-Service Class Conditions

The NAP-Capable Computers Conditions

You need to change the precedence order of a set of GPOs.

What should you use to accomplish this?

Set-GPLink

In Windows Server 2012, you can remove the Server Graphical Shell, resulting in a Minimal Server Interface.

What features are not installed in this scenario?

Windows Explorer

Internet Explorer

Desktop

Start Screen

You install Windows Server 2012 on VM2 by using Windows Deployment Services (WDS).

You need to ensure the next time VM2 restarts, you can connect to WDS using PXE.

What setting do you modify for VM2?

You must change the VM2 startup order to place PXE first in the boot order.

You are creating a read only domain controller and have the properties open for the domain controller account.

Which tab do you use to identify the domain controller for inital replication?

You need to uninstall the graphical user interface on Server 1.

What is the minimum amount of effort option?

You plan to promote DC10 to a read-only domain controller.

You need to ensure that a user named Domain\User1 can promote DC10 to a RODC. You must minimize the number of permissions assigned to User1.

What should you do?

From the Active Directory Administrative Center, pre-create the RODC computer account.

You need to configure a website on Server 1 to use a SSL certificate.

Which certificate store should you import the certificate to?

You download and install the Microsoft Online Backup Service Agent on Server 1.

You need to ensure that you can configure an online backup from Windows Server Backup. What should you do first?

You need to create a volume that can store 3TB of user files. The solution must ensure that user files are available if one disk fails in the volume.

What should you create?

You need to deploy IP Address Management (IPAM) to manage DNS and DHCP.

Which server should you install IPAM?

Administrators

Backup Operators

Server Operators

Print Operators

You need to manage DHCP servers by using IPAM.

Which three actions should you perform?

Provision the IPAM Server

Configure server discovery

Set the manageability status of the server.

Run the Configure-SMRemoting.ps1 script

Run the Set-ExecutionPolicy command let

You implement DirectAccess and an IKEv2 VPN.

You need to view the properites of the VPN connection.

Which connection properity should you view?

You implement DirectAccess. You need to view the properties of the DirectAccess connection. 

What connection properites should you view?

A user named User1 is a member of the local admin group on Node1 and Node2 of a failover cluster.

User 1 creates a File Server Role named File1 by using file server for general use option.  File1 fails to start.

What should you do?

Server1 and Server2 have the hyper-v role installed. They are configured as hyper-v replicas of eachother.

You need to verify whether the replica of VM5 on Server 1 is functional. VM5 on sever2 must remain online and functional.

What should you do from Hyper-V Manager?

You can use the __.exe tool to create installation media for addtional domain controllers that you are creating in a domain.

You add a new server named server2. Server2 has faster hard disk drives, more RAM, and a different processor manufacturer than Sever1. You need to move all of the virtual machiens from Server 1 to Server 2.

Which solution can you use to minimize down time?

You perform a server core installation of Windows Server 2012 on a server named Server1.

You need to add a GUI to server1. What tool should you use?

dism.exe command

dism /online /enable-feature /featurename:Server-Gui-Mgmt /featurename:Server-Gui-Shell /featurename:ServerCore-FullServer /source:sourcelocation

You need to configure server1 to start your customer data collector DCS1 automiatically when the network usage exceeds 70 percent.

Which type of data collector should you create?

You need to create a network adatper team from teh three network adatpers connected to LAN1.

Which tool should you use?

You discover that the Default Domain Policy Group policy objects and the Default domain controllers policty gpos were deleted. 

You need to recover teh Default Domain Policy and Default Domain Controllers Policy GPOs. What should you run?

You need to ensure that VM1 on Server1 can start if Server2 fails.

What solution will you use if minimizing cost? There is a high latency link between the two offices.

You need to provide the members of RODC_Admins with the ability to manage hardware and software of RODC1. You must not provide RODC_Admins the abilty to manage AD objects.

What should you do?

On Server1, you create a virtual machine named VM1. VM1 has a legacy network adapter.

You need to assign a specific amount of available bandwidth to VM1.

What should you do first?

You need to view the amount of memory resources and processor resources that VM4 currently uses.

Which tool should you use on Hyperv1?

You plan to modify the NTFS permissions for many folders on the file servers by using central access policies. 

You need to identify any users who will be denied access.

What is the order you should perform the necessary actions?

1. Create a central access rule
2. Create a centeral access policy
3. In GPO1, modify the Audit Central Access Policy Staging setting and configure the Central Access Policy setting.
4. Modify the security settings of the shared folders on the file server.
5. Search for failure events in the security logs from the file servers.

You promote Server1 to a domain controller.

You need to view the service location SRV records that Server1 registers in DNS.

What should you do on Server1?

On DC2, you open server manager and add Server1.

From DC2, you right-click and attempt to manage DHCP, however the option is not there.

You need to ensure that when you right-click Server1, you see the option to run DHCP console.

What should you do?