Term
[Types of Deficiency Reports]
What is the purpose of deficiency reports?
A) Deficiency reports identify, report, and track deficiencies involving Air Force personnel.
B) Deficiency reports identify, report, and track deficiencies on Air Force aircraft only.
C) Deficiency reports identify, report, and track deficiences on Air Force vehicles, equipment, components, major assemblies, and subassemblies of the same.
D) Deficiency reports identify, report, and track deficiencies and improvements on Air Force motor vehicles, equipment, components, major assemblies, and subassemblies of the same. |
|
Definition
| Deficiency reports identify, report, and track deficiences on Air Force vehicles, equipment, components, major assemblies, and subassemblies of the same. |
|
|
Term
[Types of Deficiency Reports]
Which category report would you submit for an incident that involved the serious injury of an individual?
A) Category I
B) Category II
C) Category III
D) Category IV |
|
Definition
|
|
Term
[Deficiency Report Categories]
What vehicle maintenance deficiency report would best be submitted where a situation has the potential for loss of life?
A) Information Warranty Satisfactory Report
B) Action Warranty Report
C) Vehicle Unsatisfactory Report
D) Material Deficiency Report |
|
Definition
| Material Deficiency Report. |
|
|
Term
[Deficiency Report Categories]
What vehicle maintenance deficiency report would best be submitted where the depot overhaul of an assembly is unsatisfactory?
A)Information Warranty Satisfactory Report
B)Action Warranty Report
C)Vehicle Unsatisfactory Report
D)Material Deficiency Report |
|
Definition
| Vehicle Unsatisfactory Report. |
|
|
Term
[Deficiency Report Categories]
What vehicle maintenance deficiency report would be best be submitted where the district or zone representative refuses to make valid warranty repairs on a vehicle?
A)Information Warranty Satisfactory Report
B)Action Warranty Report
C)Vehicle Unsatisfactory Report
D)Material Deficiency Report |
|
Definition
|
|
Term
[Deficiency Report Categories]
Material Deficiency Report (MDR) Dull Sword is best used when?
A)A maufacturer refuses to make repairs to a vehicle under warranty.
B)A situation that is associated with nuclear surety vehicles.
C)A situation that, if uncorrected, would cause loss of life.
D)A vehicle maintenance manager determines errors in workmanship. |
|
Definition
| A situation that is associated with nuclear surety vehicles. |
|
|
Term
[Deficiency Report Categories]
What T.O. best governs the circumstances for submitting an information only warranty?
A)T.O. 00-5-15
B)T.O. 00-35D-54
C)T.O. 36-1-191
D)T.O. 36A-1-1301 |
|
Definition
|
|
Term
[Deficiency Report Categories]
Which publication provides guidance for the preparation and routing of an MDR (DULL SWORD)?
A)T.O. 36-1-191
B)AFI 24-302
C)T.O. 00-35D-54
D)AFI 91-204 |
|
Definition
|
|
Term
[The Reporting Process]
What is the report-processing point responsible for certifying the validity, completeness, and accuracy of the draft report?
A)Originating Point
B)Screening Point
C)Contact Point
D)AF Action Point |
|
Definition
|
|
Term
[The Reporting Process]
What point in the DR process is responsible for preparing the draft report within vehicle maintenance?
A)Originating Point
B)Screening Point
C)Contact Point
D)AF Action Point |
|
Definition
|
|
Term
[The Reporting Process]
What forum is responsible for reviewing reported vehicle deficiencies and establishing priorities for resolution?
A)Vehicle Fleet Managers
B)MAJCOMs
C)Vehicle Improvement Working Group
D)ALC Single Managers |
|
Definition
| Vehicle Improvement Working Groups |
|
|
Term
[Introduction to TCTOs]
Which TCTO category is best associated with an unsafe condition that could result in death or fatal injury and are recognized by border of red X's?
A)Immediate
B)Urgent
C)Routine
D)Interim |
|
Definition
|
|
Term
[Introduction to TCTOs]
What TCTO corrects deficiences of a material, mechanical, or technical nature, if uncorrected, could create a hazard through prolonged use?
A)Immediate
B)Urgent
C)Routine
D)Interim |
|
Definition
|
|
Term
[Introduction to TCTOs]
Which publication is used when circumstances prelude timely publication of emergency instructions such as a TCTO?
A) TCTO Supplement
B) One-Time Inspection
C) Retrofit Bulletin
D) Interim TCTO |
|
Definition
|
|
Term
[Introduction to TCTOs]
Which publication is best associated with extending the rescission date of a TCTO?
A) TCTO Supplement
B) One-Time Inspection
C) Retrofit Bulletin
D) Interim TCTO |
|
Definition
|
|
Term
[Introduction to TCTOs]
Which publication is best used to amend the basic TCTO already issued?
A) TCTO Supplement
B) One-Time Inspection
C) Retrofit Bulletin
D) Interim TCTO |
|
Definition
|
|
Term
[Vehicle Maintenance Responsibilities for TCTOs]
Who is responsible for scheduling TCTO repairs according to availability of the vehicles and materials?
A) Work Center Supervisor
B) Vehicle Fleet Manager
C) VM&A
D) Material Control |
|
Definition
|
|
Term
[Vehicle Maintenance Responsibilities for TCTOs]
Which statement best describes an "outstanding" TCTO?
A) A TCTO that is not accomplished five days after being delivered to VM&A.
B) A TCTO that is not accomplished within the first 180 days after it arrives on base.
C) A TCTO that is not accomplished as specified in the "when the work will be accomplished" portion of the TCTO.
D) A TCTO that is not accomplished by rescission date. |
|
Definition
| A TCTO that is not accomplished as specified in the "when the work will be accomplished' portion of the TCTO. |
|
|
Term
[Vehicle Maintenance Responsibilities for TCTOs]
What is the delayed maintenance code best associated with deferring TCTO parts kits and returning the vehicle to the using organization?
A) A
B) B
C) C
D) D |
|
Definition
|
|
Term
[Vehicle Maintenance Responsibilities for TCTOs]
Who is responsible for advising MAJCOM, and within how many hours must this be accomplished when a TCTO becomes outstanding?
A) VM&A within 24 hours
B) Vehicle Fleet Manager within 24 hours
C) VM&A within 8 hours
D) Vehicle Fleet Manager within 8 hours |
|
Definition
| Vehicle Fleet Manager within 24 hours |
|
|
Term
[Vehicle Maintenance Responsibilities for TCTOs]
Who uses the D-18 to track TCTO kits on order through base supply?
A) Work Center Supervisor
B) Vehicle Fleet Manager
C) VM&A
D) Material Control |
|
Definition
|
|
Term
[Service Bulletins]
Who are service bulletins prepared by to correct deficiencies that are discovered during vehicle production and the duration of its warranty?
A) Manufacturer
B) Vehicle Maintenance
C) WR-ALC
D) MAJCOM |
|
Definition
|
|
Term
[Service Bulletins]
Who will take necessary action to ensure they receive all service bulletins for vehicles after they entered the Air Force inventory?
A) Manufacturer
B) Vehicle Maintenance
C) WR-ALC
D) MAJCOM |
|
Definition
|
|
Term
[Service Bulletins]
With what work order prefix will the CZ transaction update automatically for a service bulletin?
A) B
B) D
C) S
D) T |
|
Definition
|
|
Term
[On-Line Vehicle Interactive Management System (OLVIMS)]
What system is best described as a MAJCOM program used to consolidate their bases' specific vehicle information and forward to Warner Robins ALC?
A) SBSS
B) REMS
C) OLVIMS
D) CAFVIMS |
|
Definition
|
|
Term
[On-Line Vehicle Interactive Management System (OLVIMS)]
What system do we receive parts and fuel issues from?
A) Accounting and Finance System
B) Standard Base Supply System
C) Registered Equipment Management System
D) Command Air Force Vehicle Integrated Management System |
|
Definition
| Standard Base Supply System |
|
|
Term
[On-Line Vehicle Interactive Management System (OLVIMS)]
What system provides status of vehicle in the shop?
A) Accounting and Finance System
B) Standard Base Supply System
C) Online Vehicle Interactive Managemnet System
D) Command Air Force Vehicle Integrated Management System |
|
Definition
| Online Vehicle Interactive Management System |
|
|
Term
[Labor Hour Reporting]
Who issues guidance to measure and monitor labor-hour productivity within vehicle maintenance?
A) Director pf Warner Robins/ALC
B) Office of the Secretary of Defense
C) Office of the Secretary of the Air Force
D) Office of the President of the United States |
|
Definition
| Office of the Secretary of Defense |
|
|
Term
[Labor Hour Reporting]
What category of labor is best associated with an individual on annual leave?
A) Direct
B) Vehicle Operator
C) Indirect Productive
D) Indirect Non-Productive |
|
Definition
|
|
Term
[Labor Hour Reporting]
What type of time is it when a mechanic takes time off during duty hours to get a haircut?
A) 01-Direct Labor
B) 20-Indirect Productive
C) 40-Indirect Non-Productive
D) 50-Indirect Non-Productive |
|
Definition
| 50-Indirect Non-Productive |
|
|
Term
[Labor Hour Reporting]
What type of time is it when a civilian VM&A goes on annual leave?
A) 01-Direct Labor
B) 20-Indirect productive
C) 40-Indirect Non-Productive
D) 50-Indirect Non-Productive |
|
Definition
| 40-Indirect Non-Productive |
|
|
Term
[Labor Hour Reporting]
What type of time is being calculated when computing the available hours for the month?
A) 01-Direct Labor
B) 20-Indirect Productive
C) 40-Indirect Non-Productive
D) 50-Indirect Non-Productive |
|
Definition
|
|
Term
[Labor Hour Reporting]
When calculating available hours, all government holidays are included.
A) True
B) False |
|
Definition
|
|
Term
[Labor Hour Reporting]
Turning in your minor maintenance work orders on time will increase your 01 direct labor hours for the month.
A) True
B) False |
|
Definition
|
|
Term
[Forms]
Which form is best used to install a marker light, from low-cost bench-stock, using less than one hour labor-hour?
A) AFTO Form 91
B) AF Form 1827
C) AF Form 1832
D) AF Form 1823-1 |
|
Definition
|
|
Term
[Forms]
What labor code(s) may be used in the overtime block of minor maintenance work order (AF Form 1827)?
A) T-Training
B) 4-Overtime Worked
C) 5-Holiday Time Worked
D) Both 4-Overtime Worked and 5-Holiday Time Worked |
|
Definition
| Both 4-Overtime Worked and 5-Holiday Time Worked |
|
|
Term
[Forms]
Which form is used to document the installation of a part having a warranty?
A) AFTO Form 91
B) AF Form 1827
C) AF Form 1832
D) AF Form 1823 |
|
Definition
|
|
Term
[Forms]
What form is to be used for documenting your leave?
A) 1823-1
B) 1831-1
C) 1827
D) 1832 |
|
Definition
|
|
Term
[Forms]
What form is used to authorize cannibalization of vehicle parts?
A) 1823-1
B) 1831-1
C) 1827
D) 1832 |
|
Definition
|
|
Term
[Forms]
Who authorizes cannibalization to take place?
A) Material Control
B) Work Center Supervisor
C) Vehicle Fleet Manager
D) Vehicle Management & Analysis |
|
Definition
|
|
Term
[Forms]
What form is used to perform Limited Technical Inspections?
A) AF Form 91
B) AFPD Form 91
C) AFTO Form 91
D) AFMAN 91 |
|
Definition
|
|
Term
[Forms]
When would an LTI take place?
A) With disposition instructions
B) With acceptance into the vehicle fleet
C) With Depot repair request
D) All of the above |
|
Definition
|
|
Term
[Data Collection Products]
What PCN is sorted by assigned group code and reflects vehicle out of commission rates?
A) PCN 8-VOC Report
B) PCN 29-Employee Master List
C) PCN 23-Vehicle Master List A
D) PCN 15-Delayed Maintenance Report |
|
Definition
|
|
Term
[Data Collection Products]
How is the PCN 8 sorted?
A) Management Code then Registration Number
B) Group Code then Management Code
C) Registration Number
D) Group Code |
|
Definition
| Group Code then Management Code |
|
|
Term
[Data Collection Products]
Fleet totals include what types of vehicles?
A) Registered
B) Non-Registered
C) Both Registered and Non-Registered
D) Neither Registered nor Non-Registered |
|
Definition
| Both Registered and Non-Registered |
|
|
Term
[Data Collection Products]
To accomplish an in-depth monthly analysis using the PCN 8, you must print the report on what day of the month?
A) Last
B) First
C) 15th
D) 4th |
|
Definition
|
|
Term
[Data Collection Products]
What transactions will place parts on the PCN 15, 16, and 62?
A) AZ and BZ
B) AX and CX
C) PZ and VZ
D) PX and VX |
|
Definition
|
|
Term
[Data Collection Products]
Which report shows a total of all delayed maintenance codes against the fleet?
A) PCN 15
B) PCN 16
C) PCN 62
D) PCN 235 |
|
Definition
|
|
Term
[Data Collection Products]
The PCN 15 is sorted by _______.
A) Bin Location
B) DIFM Parts Cost
C) Vehicle Registration Number
D) Part or National Stock Number |
|
Definition
| Vehicle Registration Number |
|
|
Term
[Data Collection Products]
How is the PCN 23 sorted?
A) Make and Type
B) Management Code
C) Organization Code
D) Registration Number |
|
Definition
|
|
Term
[Data Collection Products]
What are vehicle equivalents used to determine?
A) Budget
B) Vehicle Authorizations
C) Replacement Codes
D) Manning |
|
Definition
|
|
Term
[Data Collection Products]
How is the PCN 24 sorted?
A) Make and Type
B) Management Code
C) Organization Code
D) Registration Number |
|
Definition
|
|
Term
[Data Collection Products]
The PCN 56 is produced at the end of what months?
A) April, July, October, and January
B) January, Febuary, March, and April
C) February, May, August, and November
D) March, June, September, and December |
|
Definition
| March, June, September, and December |
|
|
Term
[Data Collection Products]
The PCN 56 shows a collected fuel usage from what monthly PCN?
A) PCN 29
B) PCN 32
C) PCN 46
D) PCN 64 |
|
Definition
|
|
Term
[Data Collection Products]
The majority of errors on the PCN 56 are caused by _________.
A) Bogus Odometer Readings
B) Keypunch Mistakes
C) Misuse of Fuel Key
D) All of the Above |
|
Definition
|
|
Term
[Data Collection Products]
What PCN could be used to check a parts effective warranty date and/or mileage?
A) PCN 23
B) PCN 24
C) PCN 49
D) PCN 62 |
|
Definition
|
|
Term
[Data Collection Activity]
What is the purpose of OLVIMS?
A) Provides an on-line, interactive system of records and files which can be viewed only in a real-time manner.
B) Provides a stand-alone system of files which can be accessed, deleted, and summarized in a real-time manner.
C) Provides an off-line, interactive system of records and files which can be created, accessed, updated, deleted, exercised, and summarized.
D) Provides an on-line, interactive system of records and files which can be created, accessed, updated, deleted, exercised, and summarized in a real-time manner. |
|
Definition
| Provides an on-line, interactive system of records and files which can be created, accessed, updated, deleted, exercised, and summarized in a real-time manner. |
|
|
Term
[Data Collection Activity]
What MAJCOM's program used to consolidate their bases' specific vehicle information and forward to Warner Robins ALC?
A) SBSS
B) REMS
C) OLVIMS
D) CAFVIMS |
|
Definition
|
|
Term
[Data Collection Activity]
The amount of time expended toward repair of vehicles, equipment, and their accessories is an example of what labor hour category?
A) Direct (01 Series)
B) Manual (70 Series)
C) Indirect Production (20 Series)
D) Indirect Non-Productive (40 and 50 Series) |
|
Definition
|
|
Term
[Data Collection Activity]
What is the best labor category associated with maintenance personnel working on an EPR (Enlisted Performance Report)?
A) Direct (01 Series)
B) Manual (70 Series)
C) Indirect Productive (20 Series)
D) Indirect Non-Productive (40 and 50 Series) |
|
Definition
| Indirect Productive (20 Series) |
|
|
Term
[Data Collection Activity]
Minor maintenance work orders are completed on which form?
A) AF Form 1823
B) AF Form 1824
C) AF Form 1827
D) AF Form 1832 |
|
Definition
|
|
Term
[Data Collection Activity]
What minor maintenance work order number is used to record labor hours for shop equipment repairs and automotive spares buildup?
A) J9999
B) J9998
C) J9997
D) J9996 |
|
Definition
|
|
Term
[Data Collection Activity]
A "P" in the delayed work order section of an 1823 indicates what?
A) Paint Complete
B) Complete- All parts have been received
C) Partial- Some parts have been received against the delayed work order
D) Part of the delayed job has been completed and the work order is partially closed |
|
Definition
| Partial- Some parts have been received against the delayed work order |
|
|
Term
[Data Collection Activity]
An AFTO Form 91 Limited Technical Inspection is processed under which of the following situations?
A) Upon a repair request/return status of a Depot Vehicle
B) When VM&A accomplishes a no-notice inspection
C) Every time a vehicle is issued to a new unit
D) Every time a vehicle enters into the shop |
|
Definition
| Upon a repair/return status of a Depot Vehicle |
|
|
Term
[Data Collection Activity]
What form is required to perform a schedule LOF using 1.7 labor hours?
A) AFTO Form 91
B) AF Form 1827
C) AF Form 1832
D) AF Form 1823-1 |
|
Definition
|
|
Term
[Data Collection Activity]
What type of hours can be used in the overtime block of the minor maintenance work order (AF Form 1827)?
A) T-Training
B) 4-Overtime Worked
C) 5-Holiday Time Worked
D) Both 4-Overtime Worked and 5-Holiday Time Worked |
|
Definition
| Both 4-Overtime Worked and 5-Holiday Time Worked |
|
|
Term
[Depot Maintenance]
Who determines the most economical method of obtaining depot repairs on vehicles?
A) Work Center Supervisor
B) Vehicle Fleet Manager
C) MAJCOM
D) ALC Production Manager |
|
Definition
|
|
Term
[Depot Maintenance]
Who certifies that vehicle repairs are beyond a shop's capability?
A) Work Center Supervisor
B) Vehicle Fleet Manager
C) MAJCOM
D) ALC Production Manager |
|
Definition
|
|
Term
[Depot Maintenance]
What is the repair code, listed in the ML-C FED LOG, which identifies a vehicle's depot eligibility?
A) CODE P
B) CODE Q
C) CODE R
D) CODE S |
|
Definition
|
|
Term
[Depot Maintenance]
Who determines if a vehicle is unworthy of continued depot overhaul due to age or obsolescence of major components?
A) Vehicle Manufacturer
B) Vehicle Fleet Manager
C) MAJCOM
D) WR-ALC/LE |
|
Definition
|
|
Term
[Depot Maintenance]
Who consolidates the Depot LTIs and forwards them with a cover letter to WR-ALC?
A) VM
B) VFM
C) VM&A
D) MAJCOM |
|
Definition
|
|
Term
[Depot Maintenance]
What is the number of "out years" within a standard depot plan?
A) 2 Out Years
B) 3 Out Years
C) 4 Out Years
D) 5 Out Years |
|
Definition
|
|
Term
[Depot Maintenance]
What items would you use when developing the Depot plan?
A) LTI and Due-In listing
B) LTI, Due-In listing, and VAL
C) VAL and Work Order
D) Due-In listing, VAL, and Work Order |
|
Definition
| LTI, Due-In listing, and VAL |
|
|
Term
[Depot Maintenance]
What is the first OLVIMS replacement code used for a vehicle returning from depot?
A) Code R
B) Code S
C) Code T
D) Code U |
|
Definition
|
|
Term
[Depot Maintenance]
What is the maximum number of months OLVIMS will maintain a depot overhauled vehicle in replacement code "S"?
A) 24 Months
B) 36 Months
C) 48 Months
D) 60 Months |
|
Definition
|
|
Term
[Depot Maintenance]
What deficiency report is mandatory when discrepancies are discovered on a vehicle returning from depot overhaul?
A) Vehicle Unsatisfactory Report
B) Action Warranty Report
C) Information Warranty Satisfactory Report
D) Material Deficiency Report |
|
Definition
| Vehicle Unsatisfactory Report |
|
|
Term
[Depot Maintenance]
Who has the authority to contact the overhaul contractor to resolve warranty discrepancies on a vehicle returned from depot overhaul?
A) Work Center Supervisor
B) Vehicle Fleet Manager
C) MAJCOM
D) ALC Production Manager |
|
Definition
|
|
Term
[Budget Inputs]
What position is responsible for regarding the day-to-day consumption of work hours, supplies, equipment, and services?
A) Base Budget Officer
B) Responsibility Center Manager
C) Resource Advisor
D) Cost Center Manager |
|
Definition
|
|
Term
[Budget Inputs]
Which role in the budget process does the VFM/VMS normally play?
A) Base Budget Officer
B) Responsibility Center Manager
C) Resource Advisor
D) Cost Center Manager |
|
Definition
|
|
Term
[Budget Inputs]
Which budget code is commonly displayed as a three-or five-digit code and identifies the type or kind of expenditure incurred?
A) Element of Expense Investment Code
B) Responsibility Center/Cost Center Code
C) Base Supply Organization Code
D) Fund Cite Code |
|
Definition
| Element of Expense Investment Code |
|
|
Term
[Budget Inputs]
Which element of expense investment code is normally associated with a purchase of a piece of equipment through base supply?
A) 409
B) 569
C) 609
D) 628 |
|
Definition
|
|
Term
[Budget Inputs]
Which element of expense investment code is normally associated with TDY travel per diem?
A) 409
B) 569
C) 609
D) 628 |
|
Definition
|
|
Term
[Introduction to Vehicle Management Training]
Who is responsible for advising and assisting supervisors in the development and use of training requirements?
A) Trainee
B) Work Center Supervisor
C) Training Leader
D) Unit Training Manager |
|
Definition
|
|
Term
[Introduction to Vehicle Management Training]
Who is responsible for identifying qualification and upgrade requirements for the work center and individuals?
A) Trainee
B) Work Center Supervisor
C) Training Leader
D) Unit Training Manager |
|
Definition
|
|
Term
[Introduction to Vehicle Management Training]
Who is responsible for conducting and documenting an initail evaluation of knowledge and skills?
A) Trainee
B) Work Center Supervisor
C) Training Leader
D) Unit Training Manager |
|
Definition
|
|
Term
[Introduction to Vehicle Management Training]
Which category of training is best associated with courses taught at a General Motors training center?
A) General Management Training
B) Commerical Training
C) On-the-Job Training
D) Special Training |
|
Definition
|
|
Term
[Introduction to Vehicle Management Training]
Which Air Force training standard identifies the duties, tasks, and technical references to support training?
A) Education and training course announcements web page
B) Career field education and training plan
C) Specialty training standard
D) Course training standard |
|
Definition
| Special training standard |
|
|
Term
[Introduction to Vehicle Management Training]
Select the most correct proficiency code, found in an STS, identifying subject knowledge.
A) B
B) 2B
C) 2
D) 2b |
|
Definition
|
|
Term
[Introduction to Vehicle Management Training]
Identify the core tasks covered by career development courses at five skill level by task item number.
A) 7.1, 8.1, and 8.5
B) 7.2, 8.3, and 8.4
C) 7.2, 8.1, and 8.4
D) 7.0, 8.3, and 8.5 |
|
Definition
|
|
Term
[Vehicle Maintenance Training Activity]
What publication is best described as a comprehensive core-training document that identifies the life cycle of education and training requirements?
A) Education and Traininh Course Announcements Web Page
B) Career Field Education and Training Plan
C) Specialty Training Standard
D) Course Training Standard |
|
Definition
| Career Field Education and Training Plan |
|
|
Term
[Vehicle Maintenance Training Activity]
We train for all of these reasons with the exception of ________.
A) inspection results
B) liability
C) safety
D) enforcing policies and procedures |
|
Definition
|
|
Term
[Mobility Organization]
What is the five-digit alphanumeric code describing a deploying force's specific capability?
A) Unit Type Code
B) Operations Plans
C) Base Deployment Guidance
D) SORTS Reporting |
|
Definition
|
|
Term
[Mobility Organization]
Who is the base commander's representative in overall control, coordination, and direction of a base's deployment?
A) Logistics Readiness Squadron Commander
B) Deployment Processing Unit Officer
C) Unit Deployment Manager
D) Installation Deployment Officer |
|
Definition
| Installation Deployment Officer |
|
|
Term
[Mobility Organization]
What installation work center is responsible for controlling the overall deployment operation?
A) Deployment Processing Unit
B) Deployment Control Center
C) Cargo Deployment Function
D) Personnel Deployment Function |
|
Definition
| Deployment Control Center |
|
|
Term
[Preparing for Tasking]
What package is best described as a series of assembled parts, purchased with operations and maintenance funds, and shipped at the time of vehicle deployment?
A) Mobility Readiness Spares Package (MRSP)
B) Temporary Mission Support Kit (TMSK)
C) Individual Tool Kit (ITK)
D) Shop Tools and Equipment (STE) |
|
Definition
| Temporary Mission Support Kit (TMSK) |
|
|
Term
[Preparing for Tasking]
You would perform schedule maintenance on a vehicle if due within how many days prior to shipment?
A) 90
B) 120
C) 150
D) 180 |
|
Definition
|
|
Term
[Preparing for Tasking]
In which publication can you find a pre-deployment listing of required publications and forms you should take with you when deploying?
A) TO 36-1-191
B) AFI 36-302
C) AFI 23-302
D) AFH 23-302 |
|
Definition
|
|
Term
[Deployed Location Concept]
Increased Operator Maintenance allows the operators to accomplish what type of work on their own vehicles?
A) Engine Rebuild
B) Replace Headlights
C) Transmission Overhaul
D) Replace Tires |
|
Definition
|
|
Term
[Deployed Location Concept]
Priorty 1 vehicles are best associated with what type or grouping of vehicles?
A) Sortie generating vehicles
B) Sortie sustaining vehicles
C) Level A triage vehicles
D) Level B triage vehicles |
|
Definition
| Sortie generating vehicles |
|
|
Term
[Deployed Location Concept]
OLVIMS is normally established within how many days?
A) 5 days
B) 10 days
C) 30 days
D) 60 days |
|
Definition
|
|
